"VMC SMART D " command

[Schuh, Richard]

RTM/ESA is not supported on V5 systems, is it? Or have you written a VMC EXEC that invokes ESAMON?

Regards,
Richard Schuh

-----Original Message-----
From: VM/ESA and z/VM Discussions [mailto:VMESA-***@LISTSERV.UARK.EDU] On Behalf Of Paul Williams
Sent: Friday, January 27, 2006 3:22 PM
To: VMESA-***@LISTSERV.UARK.EDU
Subject: "VMC SMART D " command

We upgraded from z/VM 4.3 to z/VM 5.1 a few months ago. Since the upgrade,
the "VMC SMART D" command seems to work differently. Specifically, it only
shows the top three users of the CPU. Under z/VM 4.3, it also showed some
device information. Does anyone have any ideas, or can anyone point me to
the documentation?

Thank you

Paul E. Williams | The Capital Group Companies |
Location: BRO | Extension: 57037
Outside: 714-671-7037 | E-mail: ***@capgroup.com
[ Mailing: 135 S. State College Blvd. 120-G Brea,
CA 92821 USA ]

[Eginhard Jaeger]

IBM's replacement for both RTM (realtime monitoring) and the Performance
Reporting Facility (batch mode processing of CP monitor data) on current
z/VM releases is the z/VM Performance Toolkit. RTM and PRF are no longer
supported on 5.1.
The good news is that the Performance Toolkit comes pre-installed, so you
should already have it. And I believe customers with RTM or PRF licences can
still migrate to PerfKit free of charge and only have to pay a different
maintenance fee.

(BTW: While it is still possible to use the VMC interface, that is no longer
the recommended method for performance data retrieval with PerfKit; have a
look at the documentation.)

Eginhard Jaeger

----- Original Message -----
From: "Paul Williams" <***@capgroup.com>
To: <VMESA-***@LISTSERV.UARK.EDU>
Sent: Saturday, January 28, 2006 1:04 AM
Subject: Re: "VMC SMART D " command


>I am using a exec called DSMART (in place for years) which runs the
> following commands:
>
> &TRACE OFF
> VMC SMART D &1 &2 &3 &4 &5
>
> Is there another facility/command that I should be using under z/VM 5.1?
>
> Paul E. Williams | The Capital Group Companies |
> Location: BRO | Extension: 57037
> Outside: 714-671-7037 | E-mail: ***@capgroup.com
> [ Mailing: 135 S. State College Blvd. 120-G Brea,
> CA 92821 USA ]
>
>
>
>
>
>
>
> "Schuh, Richard"
> <***@visa.com>
> Sent by: VM/ESA To
> and z/VM VMESA-***@LISTSERV.UARK.EDU
> Discussions cc
> <VMESA-***@LISTSERV
> .UARK.EDU> Subject
> Re: "VMC SMART D " command
>
> 01/27/2006 03:51
> PM
>
>
> Please respond to
> VM/ESA and z/VM
> Discussions
> <VMESA-***@LISTSERV
> .UARK.EDU>
>
>
>
>
>
>
> RTM/ESA is not supported on V5 systems, is it? Or have you written a VMC
> EXEC that invokes ESAMON?
>
> Regards,
> Richard Schuh
>
> -----Original Message-----
> From: VM/ESA and z/VM Discussions
> [mailto:VMESA-***@LISTSERV.UARK.EDU] On Behalf Of Paul Williams
> Sent: Friday, January 27, 2006 3:22 PM
> To: VMESA-***@LISTSERV.UARK.EDU
> Subject: "VMC SMART D " command
>
> We upgraded from z/VM 4.3 to z/VM 5.1 a few months ago. Since the upgrade,
> the "VMC SMART D" command seems to work differently. Specifically, it only
> shows the top three users of the CPU. Under z/VM 4.3, it also showed some
> device information. Does anyone have any ideas, or can anyone point me to
> the documentation?
>
> Thank you
>
> Paul E. Williams | The Capital Group Companies |
> Location: BRO | Extension: 57037
> Outside: 714-671-7037 | E-mail: ***@capgroup.com
> [ Mailing: 135 S. State College Blvd. 120-G Brea,
> CA 92821 USA ]